Analysis of Acceleration Effect in Data Dissemination in Vehicular Networks Using Rateless Codes

Mobility models of nodes have an important role in the evaluation of data dissemination protocols in vehicular ad hoc networks (VANETs). Many recent researches have used the constant velocity mobility models while vehicles have acceleration and their speeds change as they move. Because of the dynamic nature of VANETs, the network changes from a densely connected to the sparsely connected environment in a short time. In sparsely connected networks, it is said that vehicles move in clusters. In this paper, the constant acceleration mobility calculations for the sparsely connected network and its characteristics have been presented. These characteristics are usable for the evaluation of the data dissemination protocols in VANETs. The results show that acceleration affects the number of viewed clusters during the trip and the number of vehicles within a cluster. In fact, acceleration has a significant impact on the network sparsely connection. This matter shows that the appropriate data dissemination protocol should be used to study the acceleration effect which is applicable in sparse networks. The analysis in this research provides the necessary background for better understanding and accurate calculations for the evaluation of data dissemination in VANETs.     

On the formulation design and rheological evaluations of pectin-based functional gels

In the current study, formulation design and development of a novel pectin-based functional gel were investigated. Amidated low methoxyl pectin (ALMP), high methoxyl pectin (HMP), sorbitol, inulin, rebaudioside-A, gardenia, phloridzin, quercetin, apple flavor, and calcium chloride (as its dihydrated salt) were selected as general ingredients. Response surface methodology was applied to design different formulations and to investigate on their experimental responses. The oscillatory tests were carried out in 2 stages with ALMP, HMP, sorbitol, and inulin as the variables of the 1st stage and ALMP and calcium chloride as the variables of the 2nd stage. Results of the 1st stage indicated relatively similar behaviors throughout the frequency range applied for all of the samples studied (true gels). However, magnitudes of the 5 rheological parameters of this study (storage modulus, loss modulus, loss tangent, complex modulus, and complex viscosity) were affected by different variables (ALMP, HMP, inulin, and sorbitol concentrations). Experimental results confirmed that sorbitol could be omitted from the formula while inulin and HMP could be used at their highest levels studied. At the 2nd stage, only 2 formulas indicated a strong gel behavior and other formulas showed typical behaviors of weaker gels or those of the concentrated solutions. At the conclusion of this study, a finished gelled product formula was suggested with the application of the best levels of the ingredients. The resultant gel was found to be set rapidly with no syneresis and showed a potential to be considered as a functional gelled dessert.     

Multiscale analysis of stiffness and fracture of nanoparticle-reinforced composites using micromechanics and global–local finite element models

A combined micromechanics analysis and global–local finite element method is proposed to study the interaction of particles and matrix at the nano-scale near a crack tip. An analytical model is used to obtain the effective elastic modulus of nanoparticle-reinforced composites, then a global–local multi-scale finite element model with effective homogeneous material properties is used to study the fracture of a compact tension sample. For SiO₂ particle-reinforced epoxy composites with various volume fractions, the simulation results for effective elastic modulus, fracture toughness, and critical strain energy release rate show good agreement with previously published experimental data. It is demonstrated that the proposed parametric multi-scale model can be used to efficiently study the toughness mechanisms at both the macro and nano-scale.     

Effect of two horizontal components of earthquake on nonlinear response of torsionally coupled base isolated structures

Torsion in base‐isolated structures using bilinear rubber isolators effected by two horizontal components of earthquake simultaneously is investigated under various principal parameters including number of storeys; ratio of uncoupled torsional frequency to lateral frequency in the superstructure; ratio of uncoupled torsional frequency to lateral frequency in the isolation system; mass eccentricity in the superstructure and isolation system; and, in addition, the direction of eccentricity. Structure was supposed a shear structure and it was modeled by using concentrated mass and springs. Isolators are modelled by using nonlinear springs considering the interaction of isolator behaviour in two directions. The effect of variation in considered parameters on the behaviour of the superstructure and isolation system is investigated under seven ground motions. It is demonstrated that the parameters affect asymmetric structure behaviour with respect to symmetric one. The results of our investigations help us to understand the asymmetric structure behaviour under bidirectional earthquake by comparing it with a symmetric one. These results demonstrate that asymmetry in the superstructure or isolation system could have a significant effect on the torsional behaviour of isolated structures. In addition, the results show that the use of rigid superstructures and calculation of dynamic torsion by multiplying eccentricity by the dynamic base shear are unacceptable assumptions. Torsional effect on the isolated structural behaviour is amplified by considering two horizontal components of earthquake and comparing them with just one horizontal component. Copyright © 2010 John Wiley & Sons, Ltd.     

Bordetella pertussis adenylate cyclase toxin: proCyaA and CyaC proteins synthesised separately in Escherichia coli produce active toxin in vitro

We analyzed the role of Fyn tyrosine kinase in cell cycle progression of B lymphocyte progenitor (pro B cell). Whereas there were no substantial defects in the intramarrow B cell genesis in the fyn(-) mouse, and long-term proliferation of fyn(-) pro B cells was maintained in vitro under a serum containing culture condition, the cell cycle was arrested at G2/M upon serum deprivation. Morphological analyses demonstrated that the cytokinesis of fyn(-) pro B cells was retarded in the presence of serum and that the entry of fyn(-) pro B cells into late telophase was completely blocked under the serum-free condition. In contrast, the earlier phases of mitosis of fyn(-) pro B cells proceeded normally without FCS. This failure to initiate late telophase resulted in the accumulation of elliptical binucleated cells that might be the outcome of the nuclear division without cytokinesis. Consistent with this defect in the progression of cytokinesis, Fyn was localized in the midspace of dividing pro B cells at anaphase. These results suggested that Fyn localizes at the midspace of dividing pro B cells and regulates the progression of cytokinesis.     

Connectivity properties of large-scale sensor networks

In wireless sensor networks, both nodes and links are prone to failures. In this paper we study connectivity properties of large-scale wireless sensor networks and discuss their implicit effect on routing algorithms and network reliability. We assume a network model of n sensors which are distributed randomly over a field based on a given distribution function. The sensors may be unreliable with a probability distribution, which possibly depends on n and the location of sensors. Two active sensor nodes are connected with probability p _e (n) if they are within communication range of each other. We prove a general result relating unreliable sensor networks to reliable networks. We investigate different graph theoretic properties of sensor networks such as k-connectivity and the existence of the giant component. While connectivity (i.e. k = 1) insures that all nodes can communicate with each other, k-connectivity for k > 1 is required for multi-path routing. We analyze the average shortest path of the k paths from a node in the sensing field back to a base station. It is found that the lengths of these multiple paths in a k-connected network are all close to the shortest path. These results are shown through graph theoretical derivations and are also verified through simulations.     

辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响。采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验。结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5%和21.9%。此外,当辊速比ω/ω0为1:1.4时,成品轧制板的平均晶粒尺寸减小36%,横剖面平均硬度增加约9.2%。织构研究结果显示,辊速差越大,成品各向同性及硬度越大。然而,采用不同辊速度的连铸连轧会导致变形板伸长率降低约6%。     

An experimental study on the spray characteristics of pressure nozzle in a fluid bed granulation

The particles with a narrow size distribution are proper products in a fluid bed granulation and coating. As well, the process efficiency is one of the most important parameters, and the wall deposition of sprayed liquid reduces it. The modality of spray volume distribution is a key parameter in the definition of particle size distribution and process efficiency. This work is done in two steps: In the first step, an experimental study on spray characteristics including spray flux distribution, spray cone angle, and discharge coefficient is conducted. Based on the experimental data, the curves of liquid volume flux versus nozzle pressure and height are obtained. The results indicate that the flux distribution changes significantly with even small pressure and height changes. In the second step, the granulation process is carried out in a semi-industrial conical fluid bed, and the particles size distribution curves and the deposited mass on the bed wall are obtained. The results show that the precise determination of the spray flux distribution is an appropriate way to predict the well-advised nozzle pressure/height in order to achieve the narrow particle size distribution and high efficiency of the process.     

A journey across the solid state polymerization to assess the role of critical factors influencing the molecular weight of polylactic acid

Solid state polymerization (SSP) offers an effective route for synthesizing green polymers with variable molecular weights depending on polymerization condition. In this work, critical factors governing the molecular weight of polylactic acid (PLA) in the course of SSP are manipulated systematically and their contributions to the efficiency of SSP process are discussed. The initial molecular weight of the prepolymer formed, the degree of crystallinity of prepolymer, and the SSP time are changed and analyzed for their effects through different analyses including differential scanning calorimetry, gel permeation chromatography, and Fourier‐transform infrared spectroscopy techniques. It was observed that PLA having highest molecular weight would be the result of formation of a prepolymer having low‐molecular weight, as detected by the analysis of functional group concentration. For the optimized sample, the rate of mass loss in SSP was 12,263 g/mol.day and a crystallinity drop over the hydrolysis process was 3.14 per day. The crystallinity of prepolymers was optimized at ca. 26% in regard with the PLA showing the highest molecular weight. J. VINYL ADDIT. TECHNOL., 25:165–171, 2019. © 2018 Society of Plastics Engineers     

Shear-induced migration and axial development of particles in channel flows of non-Brownian suspensions

We present an experimental study on the shear-induced migration and axial development of particles in the channel flows of non-Brownian suspensions. The suspending fluid is Newtonian. We investigate fracturing flows with a Hele-Shaw type scaling through building a unique channel setup and an advanced optical system. The local particle concentration profiles are measured via the refractive-index matching technique for a wide range of bulk volume fraction, that is, . Simultaneously, the particle image velocimetry is performed to determine the velocity profile of the particle phase. We compare our experimental results with the available two-phase continuum frameworks and show discrepancies and similarities in the fully developed and axial development of the solid volume fraction profiles. We discuss directions in which the continuum frameworks require improvements.